Floor Sanding

We use the latest dust free sanding technology from Lagler - in my opinion the best you can get! Our hand tools are all Festool - again German! and they are all used while connected to dust extraction units, again by Festool.

We are extremely proud of how clean and dust free our work environment is.  Most new clients expect a lot of dust and mess, but the truth is that there is hardly any at all, and we often leave a job cleaner than it was when we arrived!

To achieve a satisfactory end result, it is very important that enough grades of abrasives are used.  We will normally start with a 24 grit then go through 40, 60, 80, 100, 120 and fine finish with 150 grit.  This gives the best possible surface for the finish to be applied to.

Some companies will say that you only need three grades of sanding paper, which is no where near good enough in my opinion.  That's how they can do the work cheaply!

Lacquer or Oil?

You can choose to have your floor finished with a variety of coatings.  We mainly use Bona and Junckers for Lacquer and Osmo Hardwax Polyx Oil for a more natural finish, but we are familiar with many more makes and styles!